mechanical parts
Main bearing repair kit I
New repair kit for your TD124 MkI and MkII main bearing.
Exact reproduction of the original parts.
Complete repair kit, as shown in the pictures. (the shown main bearing is not included)
CHF 55.00
Final price excl. shipping costs
- 0.25 kg
- Ships within 1-3 days
Main bearing repair kit II
New repair kit for your TD124 MkI and MkII main bearing.
Including the new improved brass/bronze end cap.
Please note the difference between the improved and the original end cap, as shown in picture 4.
Complete repair kit, as shown in the pictures. (the shown main bearing is not included)
CHF 75.00
Final price excl. shipping costs
- 0.25 kg
- Ships within 1-3 days
Revised original TD124 main bearing
*SOLD OUT, PLEASE INQUIRE*
Freshly revised main bearing for TD124 MkI and MkII versions. This bearing is in near mint condition.
The new sintered bronze bearings were adapted to the spindle according to factory tolerances. The spindle has been machine polished and shows no signs of wear.
It comes with our improved brass/bronze end cap, new gasket, new thrust plate, a set of new screws and the matching oil
CHF 450.00
Final price excl. shipping costs
- 0.8 kg
- sold out / ausverkauft
TD124 main bearing bushings
2 sintered bronze bushings for TD124 main bearing. Outside diameter 18mm.
Perfect replacement for worn out or damaged bushings. Will fit TD124 MkI and MkII versions.
Important; some very early MkI versions with nylon bushings are using a different outside diameter. Please check your bushings before buying
CHF 48.00
Final price excl. shipping costs
- 0.2 kg
- on stock / am Lager
- Ships within 1-3 days
Sintered bronze bushing for idler wheels
Dryed out and worn out idler wheel bushings are often the source of annoying noise. Our new sitered bronze bushing is an exact reproduction of the original and comes with a new NOS nylon washer.
Will fit TD121, 124, 135, 184, 224
CHF 29.00
Final price excl. shipping costs
- 0.1 kg
- on stock / am Lager
- Ships within 1-3 days
Brass washer for speed adjusting link CB 857
Very often missing part. Your pitch control will not work without this simple but important part. Fits TD124 MkI and MkII
CHF 18.00
Final price excl. shipping costs
- 0.1 kg
- on stock / am Lager
- Ships within 1-3 days
NOS idler wheel nylon washer
Genuine Thorens idler wheel washer
Only limited quantity available !
Fits TD121, 124, 135, 184 and 224
CHF 15.00
Final price excl. shipping costs
- 0.05 kg
- on stock / am Lager
- Ships within 1-3 days
Step pulley bearings TD124 and others
For TD124, 134, 135, 184 and 224
Worn out bearings are often the source for annoying noise which is transmitted to the chassis.
Replacing these parts by our sintered bronze bearings fixes the problem.
Our kit also includes the matching thrust plate.
CHF 46.00
Final price excl. shipping costs
- 0.1 kg
- Ships within 1-3 days
NOS TD184 main bearing repair kit
Genuine Thorens spare parts
Only limited quantity available
Fits early version of TD184 (see picture)
CHF 45.00
Final price excl. shipping costs
- 0.1 kg
- on stock / am Lager
- Ships within 1-3 days
NOS TD184 main bearing gasket
Genuine Thorens spare part
comes wit a set of new screws
Only limited quantity available
CHF 18.00
Final price excl. shipping costs
- 0.1 kg
- on stock / am Lager
- Ships within 1-3 days
Rubber Belt TD124 etc.
Exact reproduction of the original CB 965 rubber belt.
This belt will also fit the following models: TD121, 134, 135, 184 and 224
Please make sure to clean your motor pulley as well as the step pulley before installing the new belt.
CHF 25.00
Final price excl. shipping costs
- 0.1 kg
- Ships within 1-3 days
Rubber Belt for TD125 and many more
Exact reproduction of the original rubber belt.
This belt will also fit the following models:
TD105, 110, 115, 125, 126, 127, 145, 146, 147, 150, 160, 165, 166, 226, 240, 280 MkI+MkII, 316, 318, 321, 325, 520, 521, 2001, 3001
Please make sure to clean your motor pulley etc. before installing the new belt.
CHF 25.00
Final price excl. shipping costs
- 0.1 kg
- Ships within 1-3 days
Non-magnetic main platter - Original Thorens
Original Thorens non-magnetic platter. Essential when heavy MC cartridges like Ortofon SPU etc. are used and magnetical attraction is unwanted. Very good used condition.
This platter comes with the original adaptor and screws.
RARE and hard to find item, only one available !
CHF 490.00
Final price excl. shipping costs
- 6 kg
NOS TD124 main platter grommets
Genuine Thorens spare parts
Set of 6, glueing required
Fits TD124 MkI and MkII versions
CHF 30.00
Final price excl. shipping costs
- 0.1 kg
- on stock / am Lager
- Ships within 1-3 days
NOS TD124 spring steel ribbon
Genuine Thorens spare part
Spring steel ribbon for speed change cam
fits TD124 MkI and MkII versions
CHF 120.00
Final price excl. shipping costs
- 0.1 kg
- sold out / ausverkauft
TD124 TD121 TD224 levelling knobs
Set of 4 levelling knobs in good used condition (generic picture)
Only a few sets left, extremely rare item!
Fits TD124 MkI and MkII, TD121 and TD224
The matching threaded rod's can be found in the "hardware & screws" section
CHF 80.00
Final price excl. shipping costs
- 0.2 kg
- on stock / am Lager
- Ships within 1-3 days
45rpm adaptor fastener set
These 3 fasteners replace the hard to find original fastener part (picture 3)
We're adding a piece of sealant to help centering the screws
Next to impossible to do the job without the sealant
Set consists of 3 fasteners, 3 screws and sealant
Fits TD124 MkI and MkII
CHF 45.00
Final price excl. shipping costs
- 0.1 kg
- on stock / am Lager
- Ships within 1-3 days
Dust protection cap for stepped wheel
Extremely rare and often missing NOS spare part
Protects the stepped wheel spindle against dust etc.
Fits early MkI versions of TD124, 135 and 184
CHF 25.00
Final price excl. shipping costs
- 0.1 kg
- on stock / am Lager
- Ships within 1-3 days
Stepped wheel
Remanufactured original stepped wheel in like new condition, fits MkI and MkII models
TD121, 124, 135, 184, 224
(generic picture)
CHF 140.00
Final price excl. shipping costs
- 0.5 kg
- on stock / am Lager
- Ships within 1-3 days