Spares & accessory parts for tone arms
This section contains many NOS spares for Thorens BTD12, TP14, TP16 and TP25 tone arms. We're in the process of uploading more parts, please check back frequently. Please inquire if you're looking for a specific spare part
We're also specialized in repairs/rebuilds and modifications of Thorens/SME/Ortofon tone arms. Please inquire for an offer
* picture below shows a disassambled TP14 tone arm
Thorens TP 14 / BTD12 tone arm repair kit
A common issue with these tonearms is the sagging of the counterweight due to dried out and defective decoupling rubbers.
Our new repair kit consists of two rubbers, a circlip and a washer. The rubber parts must be glued-in during assembly
CHF 45.00
Final price excl. shipping costs
- 0.1 kg
- on stock / am Lager
- Ships within 1-3 days
Thoren TP14 / TP25 bias weight
Two-piece bias weight for TP14 and TP25 tone arms.
Rare original NOS Thorens part, only a few left
Thorens part no. TP113 / 7.843.193
CHF 59.00
Final price excl. shipping costs
- 0.1 kg
- on stock / am Lager
- Ships within 1-3 days
Original Thorens NOS horizontal bearings
2 horizontal bearings for BTD12, TP14, TP25 and all Thorens-EMT tone arms
Extremely hard to find spare parts, only limited quantity available
CHF 86.00
Final price excl. shipping costs
- 0.15 kg
- on stock / am Lager
- Ships within 1-3 days
Original Thorens TP50 headshell sticker
Original NOS sticker for TP50 headshells
1 pcs. self adhesive
Extremely hard to find spare part, only limited quantity available
CHF 18.00
Final price excl. shipping costs
- 0.05 kg
- on stock / am Lager
- Ships within 1-3 days
Fingerlift for TP60 headshells
Factory original NOS fingerlift for TP60 headshells
For Thorens TD125, 145, 160, 165, 166
Hard to find spare part, only limited quantity available
CHF 25.00
Final price excl. shipping costs
- 0.1 kg
- on stock / am Lager
- Ships within 1-3 days
Cartridge mounting hardware for TP60 headshells
Original NOS spare part
Suitable for M2 screws
*the shown TP60 headshell is not included
CHF 15.00
Final price excl. shipping costs
- 0.1 kg
- on stock / am Lager
- Ships within 1-3 days
Headshell screw-kit 2
XXL headshell-screw kit with M2 screws, suitable for all shown THORENS head shells
The kit consisits of 16 pcs. of screws, 2 of each size and 16 washers.
Screw sizes: 2x20mm - 2x18mm - 2x16mm - 2x14mm - 2x12mm - 2x10mm - 2x8mm - 2x6mm
The screws can easily be shortened with a side-cutter if required.
CHF 25.00
Final price excl. shipping costs
- 0.03 kg
- on stock / am Lager
- Ships within 1-3 days
Headshell screws-kit 1
Low mass headshell-screw kit
3 different lenghts
Strenght type nylon M2.5 screws
2x6mm / 2x 8mm / 2x12mm /6x nuts
CHF 18.00
Final price excl. shipping costs
- on stock / am Lager
- Ships within 1-3 days
Pure silver headshell-wires
Set of 4, lenght = 40mm
CHF 25.00
Final price excl. shipping costs
- 0.05 kg
- on stock / am Lager
- Ships within 1-3 days
99.99% PURE COPPER HEADSHELL-Wires
Set of 4, lenght = 40mm
CHF 15.00
Final price excl. shipping costs
- 0.05 kg
- on stock / am Lager
- Ships within 1-3 days
Silicone-grease for TP14 tone arm lifting system
Your tone arm lowers to fast or too slow or is not working at all ? Replacing the grease will solve this problem in the most cases. Correct functioning of the lifting unit is only guaranteed with this special silicone grease. Packaging unit approx. 3g.
CHF 14.00
Final price excl. shipping costs
- 0.1 kg
- on stock / am Lager
- Ships within 1-3 days
Silicone oil for TP16 / TP25 tone arm lifts
Silicone oil for TP16 / TP25 and other Thorens tone arm lifting units. Correct functioning of the lifting system can only be guaranteed with this particular silicone oil. Packaging unit: 1ml syringe with cap. Will fit TD125, 145, 146, 166, 170, 280, 520 and many other lifting units constructed like in the shown pictures
CHF 20.00
Final price excl. shipping costs
- 0.1 kg
- on stock / am Lager
- Ships within 1-3 days
Universal stylus brush
Thousands of fine and soft microfibers guarantee a perfect and gentle cleaning of your stylus.
Overall lenght is 12cm or 4.7 inches
CHF 18.00
Final price excl. shipping costs
- 0.1 kg
- on stock / am Lager
- Ships within 1-3 days